PowerCore
The heart of your green energy generators
At the heart of all multi-generator systems are our PowerCore distributors. All devices and safety modules are installed here for flawless, safe operation. Fully wired, programmed and tested PowerCore
Deliveredready for connection as a mast distributor or stand model.
While the mast distributors for lighting, measuring stations incl. LTE point, W-LAN HotSpots, USB charging stations and allotment applications are provided and the batteries are also installed, the larger stand models are generally
supplied without batteries.
The SPC T1 and T2 PowerCore models are designed as supply modules for applications with higher energy requirements. This is usually about providing 230 V~ from a power of 1000 W.
Inside the housings are all safety devices such as FI/LS switches, surge protection, power separators for wind and solar energy, mechanical switching device for the wind generator brake, temperature monitoring,
Ventilation as well as the control model and an LTE unit.
For charging the connected battery packs via generator or house network, all PowerCore generally have an additional plug connection and a charge controller for external feed-in. For energy generation and storage
standard plug connections are also available, which are accessible from the outside in the protected area of the stand base.
PowerCore Properties
- Fully wired
- Programmed and tested
- Ready
- Mast distributor & stand model
- FI/LS switch
- Surge protector
- Power separators for wind and solar energy
- Mechanical switching device for wind generator brake
- Temperature
- Ventilation
- Control Model
- LTE Unit
PowerCore Product Overview
Mast distributors
PowerCore
MPC
Stand distributors
PowerCore
SPC T1
Stand distributors
PowerCore
SPC T2
PowerCore
MPC
Mast distributor | Product
- MPC 12 V – 5/ 10/ 15/ 20 A-WS
- MPC 24 V – 2.5/ 5/ 7.5/ 10 A-WS
- SPC 12 V – 250/ 375/ 500 A-WS
Technical data:
- 1 x Wind power generator 12 V/ 600 W – 24 V/ 700 W
- Max. PV power 230 Wp
- AGM/GEL memory 12 V 100 Ah – 24 V 40 Ah
- LI-IO memory from 12 V 80 Ah – 24 V 40 Ah
- MPC distributor completely assembled, pre-installed and tested incl. all equipment parts according to configuration as well as all plug connections and preparatory parts for mast mounting
- Preparation for grounding of the distributor
- Power cord (5 m)
Print version Assembly and installation instructions:
- as print and on USB stick
- of the built-in devices as print and on USB stick
Armament:
- for operation with LI-IO batteries
- 2nd Wind Generator Controller
- LTE module (for the transmission of fault reports via e-mail and remote monitoring)
- Heating module for winter operation
Accessories:
- Fully assembled, wired and programmed
- USB socket
- LTE Module
- Connection via house network or generator
- Tightness class IP 54 (Outdoor)
Dimensions/ Weight:
- Width 380 mm x height 600 mm x depth 250 mm / + attachments
- 45 – 56 kg depending on model and version incl. Battery pack
PowerCore
SPC T1
Stand distributors | Product
- SPC 12 V – 1200/ 1600/ 2000 – WS/ 2 WS
- SPC 24 V – 1200/ 1600/ 2000 – WS/ 2 WS
- SPC 48 V – 1200/ 1600/ 2000 – WS/ 2 WS
- Max. 2 wind power generators à 12 V 600 W / 24 V 700 W/ 48 V/ 800 W
- Max. PV power 7200 Wp
- Max. 12 V – 460 Ah /24 V – 480 Ah/ 48 V – 240 Ah
Technical data:
- SPC distributor completely assembled, pre-installed and tested incl. all equipment according to configuration as well as all plug connections and bases, preparation for grounding of the distributor
- Temperature-controlled ventilation
- 1 x 230 V outlet up to 10 A (all models)
- Power cord (1.5 m CEE socket to protective contact plug)
- Each 3.0 m battery cable incl. Battery terminals (fully wired and mounted for connection to PowerStore)
- 3 m grounding cable (fully wired and assembled)
- 2 – 6 PV connectors for direct connection of the solar fields
Assembly and installation instructions:
- as print version and on USB stick
- for built-in devices as print version and on USB stick
Armament:
- for operation with LI-IO batteries
- 2nd Wind Generator Controller
- LTE module (for the transmission of fault reports via e-mail and remote monitoring)
- Heating module for winter operation
Accessories:
- Fully assembled, wired and programmed
- LCD Screen System Overview
- USB socket
- LTE Module
- Connection via house network or generator
- Tightness class IP 44 (Outdoor)
Dimensions/ Weight:
- Width 800mm x Height 1200mm x Depth 320mm
- 65-87 kg, depending on equipment
PowerCore
SPC T2
Stand distributor (large) | Product
- SPC 24 V – 3000/ 5000 – 1/ 2/ 4WS
- SPC 48 V – 5000 – 1/ 2/ 4 WS
- SPC 48 V – 10000 – 1/ 2/ 4 WS
- Max. 4 wind power generators à 24/ 48V
- Max. PV power 11600 Wp
- AGM/GEL memory from 12 V/ 100 Ah – 48 V/ 230 Ah
- LI-IO memory from 12 V/ 100 Ah – 48 V/ 200 Ah
Technical data:
- SPC distributor completely assembled, pre-installed and tested incl. all equipment according to configuration as well as all plug connections and bases, preparation for grounding of the distributor
- Temperature-controlled ventilation
- 2 x 230 V outlet up to 10 A (model 5000)
- 3 x 230 V outlet up to 16 A (model 10000)
- 3 m grounding cable (fully wired and assembled)
- 2 – 6 PV connectors for direct connection of the solar panels Power cable (1.5 m CEE socket to protective contact plug)
Assembly and installation instructions
- as print version and on USB stick
- for built-in devices as print version and on USB stick
Armament:
- 2nd-4th Wind Generator Controller
- Upgrade for operation with LI-IO batteries
- Upgrade LTE module (for the transmission of fault reports via e-mail and remote monitoring)
- Upgrading heating module for winter operation
Accessories:
- Pre-assembled, wired and programmed
- LCD Screen System Overview
- USB socket
- LTE Module
- Connection via house network or generator
- Tightness class IP44 (Outdoor)
Dimensions/ Weight:
- Width 1000 mm x Height 1400 mm x Depth 420 mm
- 84 – 113 kg, depending on equipment
